— INDUSTRIES WE SERVE
Every Industry.
One Standard.
Industrial operations don’t fail everywhere — they fail in specific systems. For twenty years Droplex has engineered the lubrication, fluid transfer, and detection systems that keep manufacturing plants running reliably — in over sixteen industries, every single day.
01
Every industry has specific failure modes.
A cement plant’s lubrication challenges are not the same as a food processing facility’s. Standard solutions applied across different environments deliver inconsistent results. Droplex engineers for each specific environment.
02
The right solution requires knowing the environment.
Temperature, load, contamination, compliance requirements, and operating schedules vary by industry. Getting the system right requires understanding where it operates — not just what it serves.
03
Reliability looks different in every plant.
In a cement plant it means a kiln that does not stop. In a food plant it means compliance without contamination. In a steel plant it means continuous production under extreme load. We engineer for what reliability means in your world.
— PRIMARY INDUSTRIES
Primary Industries.
Where We Go Deepest.
Four industries where Droplex has the deepest application knowledge, the most documented outcomes, and the most specific solutions — engineered for your exact operating environment.
IN CONTROL. NOT GRINDING TO A HALT.
Cement & Mining
Extreme loads, abrasive dust, and continuous high-temperature operation — in cement plants and mining operations alike. Lubrication failure here is not a maintenance event. It is a production stop. We engineer the systems that prevent it.
- Open gear lubrication — Klüberfluid C-F 3 Ultra for kiln and ball mill drives
- Riding ring lubrication — Wolfracoat for rotary kilns
- Autolube systems — grate cooler, Atox mill, and auxiliary equipment
- Open gear spray systems — timed, engineered for specific gear geometry
- VRM oil filtration — restoring ISO cleanliness in hydraulic systems
- Lube room design and equipment
IN CONTROL. NOT COMPROMISING.
Food & Beverage Processing.
Zero contamination tolerance. NSF H1 certification. HACCP compliance. A single lubrication failure in a food plant does not just cost the repair — it costs the audit, the product recall, and the customer relationship.
- NSF H1 food-grade greases — for all direct and incidental food contact points
- NSF H1 food-grade oils — gear drives, hydraulics, and chains
- Washdown-resistant formulations — for high-pressure cleaning environments
- Food-grade chain lubricants — conveyors, packaging, and filling lines
- HACCP lubrication programme development and documentation
- Hygienic fluid transfer systems — safe, contamination-free handling
IN CONTROL. NOT GUESSING.
Pharmaceutical
GMP compliance, purity certification, and contamination control are not optional in pharmaceutical manufacturing — they are the licence to operate. Lubricants and fluid systems must meet the same standard as the products they help produce.
- NSF H1 and H2 certified lubricants — for GMP-compliant pharmaceutical environments
- Cleanroom-compatible formulations — low particle generation, low odour
- Full regulatory documentation — supporting GMP and FDA audit requirements
- Precision fluid transfer systems — sterile and semi-sterile process environments
- Gas detection systems — laboratory, process, and confined space safety
IN CONTROL. NOT FAILING.
Steel & Metal Processing
Extreme heat, heavy continuous loads, and water contact in rolling mills and continuous casters destroy standard lubricants. Steel plant reliability depends on formulations engineered specifically for these conditions — not adapted from standard industrial ranges.
- High-temperature rolling mill greases — extreme pressure, heat-resistant formulations
- Continuous caster lubrication — water-resistant, high-load bearing protection
- Water-resistant EP greases — for wet and steam-exposed applications
- High-load gear oils — ISO VG 680 and VG 1000 for heavy drive applications
- Automated lubrication systems — for high-point-count rolling mill equipment
- Oil filtration systems — restoring cleanliness in hydraulic and lube circuits
— MORE INDUSTRIES
More Industries.
Same Standard.
Beyond the four primary industries, Droplex works across a wide range of industrial sectors — applying the same engineering rigour and accountability to every operating environment.
General Industry
Production lines, hydraulic systems, compressors, and drives across general manufacturing. If it runs and needs to keep running, Droplex can help make sure it does.
Oil & Gas
Rotating equipment, pipelines, and processing facilities operate under high pressure, high temperature, and strict safety requirements. Lubrication and detection failures here carry consequences beyond the plant.
Packaging
High-speed packaging lines and filling machines cannot afford inconsistent lubrication or product contamination. Precision matters at every point on the line.
Plastics & Rubber
Injection moulding, extrusion, and compounding equipment operating at elevated temperatures with specific contamination control requirements.
Power & Wind Generation
Turbines, generators, and wind turbine gearboxes that run continuously. An unplanned stop in power generation does not just cost the repair — it costs everyone downstream.
Textile
High-speed spindles and looms cannot afford a lubricant that stains the product or gums up the mechanism. Precision matters here in a way it does not in heavy industry.
Transportation & Marine
Fleet, rail, and marine maintenance operations need structured lubrication programmes, reliable fluid transfer, and detection systems that keep the workshop and vessel safe.
Wood & Timber
Sawmill and timber processing equipment works in dust, water, and wood debris. Standard lubricants wash out or contaminate quickly. The right formulation stays where it is put.
Water & Wastewater
Pumps, blowers, and treatment equipment that live in wet, corrosive conditions. Water gets into everything. The lubricant and fluid systems have to be built for that reality.
Your Industry
If your industry is not listed here, call us. Twenty years of working across different plant environments means we have probably seen your challenge before — or something close enough.
— WHAT WE DELIVER ACROSS EVERY INDUSTRY
Three Systems.
Every Plant.
Regardless of industry, Droplex delivers across three core system areas — engineered for the specific demands of your operating environment.
SYSTEM 01
Industrial Lubrication
Centralised and automatic lubrication that delivers the right lubricant, in the right quantity, at the right interval — every time. Includes specialty lubricants for demanding and compliance-critical applications.
SYSTEM 02
Fluid Transfer Systems
Safe, accurate fluid handling of oils, greases, chemicals, and flammable fluids — without contamination risk or unsafe manual handling.
SYSTEM 03
Detection Systems
Gas detection, leak detection, and plant monitoring that flags developing risks early — before they become incidents or unplanned shutdowns.
— GET STARTED
Your industry is here.
Your plant should be too.
Start with a Reliability Assessment. We review your systems, identify where failures are originating, and show you exactly where control can be built in. No obligation. A clear picture of where your plant stands — and what it takes to make sure it runs reliably, every single day.
Typically completed within 5 working days.